Tempered Glass Bathroom Heater with Heated Towel Rack
-
HEATING ELEMENTGraphene Carbon
-
SURFACE MATERIALTempered Glass
-
SURFACE TEMPERATUREAround 120℃
-
SAFETY FEATURESOverheating Protection
-
INPUT VOLTAGE220–240V AC, 50Hz；110–120V AC, 60Hz
-
IP GRAGEIPX4
-
CONTROL TYPETouch Switch；Built-in wifi thermostat
PRODUCT DETAIL
This glass bathroom heater warms your space and dries your towels at the same time.
| Model | Body Size(mm) | Heating Power | Drying Power |
| 4D0806G-Th | 800*612*110mm | 480W | 30W |
| 4D1006G-Th | 1000*612*110mm | 620W | 30W |
| 4D1206G-Th | 1200*612*110mm | 750W | 30W |
| Features | 1) Heating element: Graphene carbon 2) Surface temperature: ＜ 120°C 3) Surface material: Tempered glass 4) Over heat protection: Yes 5) Glass color: white or black 6) Wifi control, touch control 7) IP rating: IPX4 8) 3 towel bars and each 10W |
||
Touch Switch:
- The screen displays the room temperature and the target temperature, date &time.
- Touch screen displays with mode selection, temperature adjustment and time setting.
- The product has two working modes: heating mode, a drying timer mode.
- The temperature sensor in the bottom of the towel rail
reads the room temperature and signals when to turn the towel rail on/off as the ambient temperature rises. When the room temperature is 0.5°C lower than the set temperature, the heater comes on. When the room temperature is 0.5°C higher than the set temperature, the heater turns off.
Covection Window: There are convection windows on the top and bottom of the panel heaters, which can ensure that the surface temperature of the product will not be too high under high power, and can meet the safety requirements of the surface temperature of wall-mounted heaters. It is safe to use on the wall.
Towel Rack Options:
Option 1 – Heated Towel Bars (Pre-installed)
-
Three heated bars, factory-installed
-
Each bar: 10W for gentle drying
Option 2 – Single Towel Bar (DIY Installation)
-
One non-heated bar
-
Easy to install yourself
